Hardware reference guide

Hard Drive Installation
Using SCSI
Select
with SCSI Devices
The SCSI host adapter includes the SCSISelect utility to configure
the host adapter and to run SCSI disk utilities. To run the SCSISelect
utility:
■
In POST Messages Enabled mode: Press
Ctrl + A
when the
Press <Ctrl><A> for SCSISelect Utility message displays during
POST.
■
In POST Messages Disabled mode: When the Compaq logo
screen displays, press any key to exit the logo screen.
Immediately after exiting the logo screen, press
Ctrl + A
to access
the SCSISelect utility.
A menu displays with the following options:
■
Configure/View Host Adapter Settings
❏
SCSI Bus Interface Definitions
◆
Host Adapter SCSI ID
◆
SCSI Parity Checking
◆
Host Adapter SCSI Termination
❏
Additional Options
◆
Boot Device Options
◆
SCSI Device Configuration
◆
Advanced Configuration Options
■
SCSI Disk Utilities
❏
Lists all SCSI devices and SCSI ID numbers
For additional information about configuring POST message
display status, refer to the Computer Setup Guide on the Reference
Library CD.
Compaq Evo Workstation W8000 Hardware Reference Guide B-7