Hardware reference guide

Hardware Upgrades
Installing and Removing an Expansion Board
This section provides instructions for installing and removing PCI
and AGP expansion boards.
Identifying the PCI and AGP Sockets
This workstation contains one AGP socket and six PCI sockets. The
following illustration identifies the physical locations of these
sockets.
Identifying AGP and PCI sockets
T
h
1
One 1.5V AGP Pro socket
2
Four 32-bit, 33-MHz PCI sockets; primary bus
3
Two 64-bit, 66-MHz PCI sockets; secondary bus
Evo Workstation W8000 supports 4X AGP Pro cards only. Older
type AGP cards (3.3V) are not supported and will NOT fit in the
AGP socket.
2-34 Compaq Evo Workstation W8000 Hardware Reference Guide