Hardware reference guide

Hardware Upgrades

Preparing for Drive Installation

Remove the drive bezel blank before installing any removable media

storage device, such as a tape drive, CD-ROM or DVD-ROM drive,

or diskette drive, into an empty bay location.

Removing the Bezel Blank

To remove the bezel blank:

1. Shut down the operating system properly, then turn off the

workstation and any external devices. Disconnect the power

cord from the grounded AC outlet.

2. Remove the workstation access panel. See “Removing the

Workstation Access Panel” in this chapter.

3. Remove the front bezel. See “Removing the Front Bezel” in this

chapter.

4. Remove the bezel blank:

a. Pinch together the retainer snaps on the back of the front

bezel

. This allows the bezel blank to move past the

retainer snaps.

b. Rotate the bezel blank outward

, detaching it from the

front bezel.

Removing the bezel blank from the front bezel

Compaq Evo Workstation W8000 Hardware Reference Guide 2-21