HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide (February 2005)

Installing a PTM
62 HP StorageWorks ESL9000 Series Pass-Through Mechanism (PTM) Installation Guide
10. Tighten the four screws.
The front cosmetic panel installation is complete. Repeat the procedure for
additional libraries.
Installing the rear cosmetic panels
To install the rear cosmetic panels:
1. Assemble the male
2 and female 3 cosmetic panels as shown in Figure 33.
Figure 33: Assembling the rear cosmetic panel
2. Moving the two panels as a unit, install the two lower restraints 1 into the
mating slots in the lower cabinet attachment channel and lower the set of
panels until the upper frames of the cosmetic panels rest on each of the two
library frames.
2
3
1
1
SHR-1882