HP StoargeWorks ESL9000 series tape library user guide (April 2003)

Operator Commands
80 HP StorageWorks ESL9000 Series Tape Library User Guide
Note: Before changing the Auto Drive Unload configuration option, check the
recommendations of your software application.
■ Auto Drive Unload—Causes the drive to unload a tape when a Move
Medium command is received (default in Enable).
■ Barcode Retries—Lets you set a number of attempts to read a bar code label
before giving up (default is 8).
■ Set StorageWorks Defaults—Returns all configure options to factory default
states.
Configuring a Library Option
To configure a library option:
1. From the Operator screen, press the Configure Options button. The control
panel displays the Configure: Options screen (see Figure 32).
Figure 32: Configure: options screen