HP StoargeWorks ESL9000 series tape library user guide (April 2003)

Operator Commands
76 HP StorageWorks ESL9000 Series Tape Library User Guide
Configuring the Library
The Configure Library command lets you assign the following:
■ Library model number
■ Number of storage bins
■ Number of drives
■ Library SCSI ID
■ Tape drive SCSI ID
■ PTM configuration
Note: The serial number and IEEE ID fields are set automatically through the library
firmware.
To configure any of these attributes:
1. In the Operator screen, press the Configure Library button. The control
panel displays the Configure: Library screen (see Figure 30).
Figure 30: Configure: library screen (ESL9595 shown)