HP StoargeWorks ESL9000 series tape library user guide (April 2003)

73HP StorageWorks ESL9000 Series Tape Library User Guide

Operator Commands

This chapter describes the commands found on the Operator screen of the library

control panel. Sections in this chapter include:

■ Opening the Operator Screen, page 74

■ Configuring the Library, page 76

■ Configuring Library Options, page 79

■ Calibrating the Library, page 83

■ Performing an Inventory, page 84

■ Moving Cartridges, page 85

■ Unloading a Drive, page 87

■ Unloading the Load Port, page 88

Note: The library must be off-line to perform any of the functions listed above. To

change the library status, press the Standby button on the control panel.