HP StoargeWorks ESL9000 series tape library user guide (April 2003)

Operating the Control Panel
65HP StorageWorks ESL9000 Series Tape Library User Guide
Note: The default passwords are: Operator screen -- 1234, Service screen -- 5678,
User screen -- 2222, Multi-unit screen --1234, and Import only screen -- 1111.
For more information on password and security levels see “Changing the Control
Panel Security Levels” on page 70.
2 Lock icon Shows the current security level at the touch screen GUI. Five
security levels are available: service (S), operator (O), user (U),
import only (I), and locked (L). Table 13 on page 65 lists the
attributes of each security level.
3 Load Port button Releases and locks the load port door. If the load port is locked in
the closed position, pressing this button releases the load port and
then locks the door. If the load port is locked in the open position,
pressing this button unlocks the load port, letting you rotate the
load port to the closed position where it automatically locks.
4 Standby button Toggles the library between on-line and off-line states.
5 System State
display
Shows the current state of the library (system on-line, system
off-line, system stopped, door open, and so on).
6 HP logo Displays service information and the library firmware level.
7 Contrast buttons Adjusts the contrast of the control panel.
Table 13 lists the security levels for the library.
Table 13: Security Levels, Highest to Lowest
Level
Password
Protected
Overview
Screen
Access
Tapes
Screen
Access
Operator
Screen
Access
Service
Screen
Access
Load
Port
Access
Stop and
Standby
Access
Service Yes Yes Yes Yes Yes Yes Yes
Operator Yes Yes Yes Yes No Yes Yes
User Yes Yes Yes No No Yes Yes
Multi-unit Yes No No No No No No
Import
only
Yes Yes Yes No No Yes No
Locked No Yes Yes No No No No