HP StoargeWorks ESL9000 series tape library user guide (April 2003)

Operating the Control Panel
64 HP StorageWorks ESL9000 Series Tape Library User Guide
Exiting a Screen
To exit any screen, press the Back or Home button.
If a command is executing, the control panel displays a Command In Progress
dialogue box with an Abort button. Pressing Abort cancels the command and
stops the ongoing operation. After you press Abort, you must still press the Back
button to exit the screen associated with the aborted command.
Library Controls
Library controls are located along the top and left side of the control panel in the
horizontal and vertical bars (see Figure 23 on page 64).
Figure 23: Library controls (ESL9595 shown)
1 Stop button Halts library activity immediately by cutting power to the library
robotics. Pressing the Stop button a second time restores power to
the library robotics.
6
5
4
3
2
1
7