HP StoargeWorks ESL9000 series tape library user guide (April 2003)

Preparing the Library for Operation
58 HP StorageWorks ESL9000 Series Tape Library User Guide
Turning the Library Off
To turn the library off:
1. Place the library off-line by pressing the Standby button. The library robotics
complete any current commands and then stop.
2. Verify that the control panel display shows System Off-line.
3. Verify that the gripper is empty by checking the Overview screen on the
control panel (see Chapter 3). If there is a tape cartridge in the gripper,
perform a Move command to place the cartridge in an available storage bin.
4. Turn off the power switch located below the control panel.
5. Turn off both circuit breakers on the AC power distribution assembly.
Note: Wait 10 seconds before turning on the power switch again.