User's Manual

Digital Proofing: Step by step
21
You see the name that you have given in the upper-left corner. All you need to do to get the files
printed on the press is to click the proof button. You will see a progress bar at the bottom of your
screen. The charts can now be printed on the press. The screenshot above shows you an example of
a 7 color profile, with an i1 spectrophotometer attached.
Measuring the testchart
To start measuring the test-chart, make sure the spectrophotometer is hooked up to your system. See
Connecting a Spectorophotometer (page 7).
IMPORTANT REMARK: It is when you actually print
the charts on the press, that all the parameters are
applied. Therefore we strongly advise to observe a
clear naming convention when you save profiles.
Please choose an accurate name that includes
substrate, output ink set and LUT.
When the charts to make this profile have been printed
with LUT05, you should later only apply it in your
production workflow duringon jobs to be printed with
THE CORRESPONDING LUT. Ripping jobs with a profile
made for one kind of LUT, and outputting it on the
press with a totally different LUT would have a serious
effect on the output of colours.