Maintenance and Service Guide
Table Of Contents
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures
- Setup Utility (BIOS) and System Diagnostics
- Specifications
- Backing up, restoring, and recovering
- Power cord set requirements
- Recycling
- Index
Remove the TouchPad button board and cable:
1. Turn the top cover upside down, with the back edge toward you.
2. Disconnect the TouchPad cable (1) and release the metal tape (2).
3. Remove the two Phillips PM screws, and then remove the TouchPad tab.
4. Remove the TouchPad.
Reverse this procedure to install the TouchPad button board and cable.
36 Chapter 4 Removal and replacement procedures