User guide

Calibrate the scanner
If the copied image is not positioned correctly on the page, calibrate the scanner.
NOTE: When using the document feeder, make sure to adjust the guides in the input tray so they are
against the original document.
1. From the Home screen on the product control panel, scroll to and touch the Device Maintenance
button.
2. Open the following menus:
●
Calibration/Cleaning
●
Calibrate Scanner
3. Touch the Next button to start the calibration process. Follow the on-screen prompts.
4. Wait while the product calibrates, and then try copying again.
Check the paper settings
Check the paper settings if copied pages have smears, fuzzy or dark print, curled paper, scattered dots
of toner, loose toner, or areas where toner has dropped out.
Check the paper size and type configuration
1. From the Home screen on the product control panel, scroll to and touch the Trays button.
2. Touch the line for the tray that you want to configure, and then touch the Modify button.
3. Select the paper size and paper type from the lists of options.
4. Touch the OK button to save your selection.
Select the tray to use for the copy
1. From the Home screen on the product control panel, touch the Copy button.
2. Touch the Paper Selection button.
3. Select the tray that holds the paper that you want to use, and then touch the OK button.
Check the image-adjustment settings
Adjust these additional settings to improve copy quality.
1. From the Home screen on the product control panel, touch the Copy button.
2. Touch the Image Adjustment button.
ENWW
Improve copy quality
271