User guide

Configure general fax send settings
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
Fax Settings
●
Fax Send Settings
●
Fax Send Setup
●
General Fax Send Settings
Configure any of the following settings:
Menu item Description
Fax Number Confirmation When the Fax Number Confirmation feature is enabled, the fax number must be
entered twice to ensure that it was entered correctly. The feature is disabled by
default.
PC Fax Send Use the PC Fax Send feature to send faxes from a PC. This feature is enabled by
default.
Fax Header Use the Fax Header feature to control whether the header is appended to the top,
and content is shifted down, or if the header is overlayed on top of the previous
header.
JBIG Compression Enabling the JBIG Compression feature can reduce phone-call charges by reducing
fax transmission time and might be the preferred setting. However, using the JBIG
Compression feature might cause compatibility problems when communicating with
some older fax machines, in which case you might need to disable it.
NOTE: The JBIG Compression feature works only when both the sending and
receiving machines have this setting.
Error Correction Mode Normally, the fax accessory monitors the signals on the telephone line while it is
sending or receiving a fax. If the fax accessory detects an error during the
transmission and the Error Correction Mode setting is on, the fax accessory can
request that the error portion of the fax be sent again.
The Error Correction Mode feature is enabled by default. You should turn it off only
if you are having trouble sending or receiving a fax and if you are willing to accept
the errors in the transmission and a probable quality reduction in the image.
Turning off the setting might be useful when you are trying to send a fax overseas or
receive one from overseas, or if you are using a satellite telephone connection.
NOTE: Some VoIP providers might suggest turning off the Error Correction Mode
setting. However, this is not usually necessary.
ENWW
Configure general fax send settings
177