User guide

Automatic tone adjustment for scanning

You can configure the product to automatically adjust the darkness, contrast, and background cleanup

settings on a page-by-page basis. For example, if the original document has some pages that are

lighter than the others, the resulting scanned image has a more uniform darkness setting for all pages.

1. From the Home screen on the product control panel, scroll to and touch the button for the scan/

send feature that you want to use.

2. Complete the fields on the first screen, as appropriate for the scan/send feature you are using.

3. Touch the More Options button at the bottom of the screen.

4. Touch the Image Adjustment button.

NOTE: If the button is not on the first page of options, touch the More Options button again.

5. Touch the Automatic Tone check box to select it.

6. Touch the OK button to save the changes.

7. Touch the Start

button to begin scanning.

Automatic misfeed detection for scanning (HP EveryPage)

The document feeder for this product has a sensor that automatically detects the thickness of the pages

as they enter the scanning mechanism. If the sensor detects two or more pieces of paper at one time,

the product stops and alerts you to remove the pages. The setting is turned on by default. To override

the setting so that you can scan heavy paper or documents such as folded booklets through the

document feeder, follow these instructions: