HP StorageWorks Secure Key Manager Pre-installation survey and checklists, for connecting to ETLA libraries (AJ087-96012, November 2008)
Table Of Contents
- HP StorageWorks Secure Key Manager Pre-installation survey and checklists, for connecting to ETLA libraries
- SKM pre-installation survey
- Sourcing the SKM security officer (SO) role and ensuring installation support
- Designing the cluster, identifying any cross-geography requirements
- Obtaining a static IP address for the SKM
- Identifying the ETLA libraries and number of LTO4 drives to be used for encryption
- Addressing physical installation and security requirements for the SKM
- Designing a backup strategy for keys and audit logs
- Determining the appropriate key generation policies
- Meeting minimum ETLA hardware and firmware requirements
- Configuring accounts for each ETLA library
- Enrolling the ETLA libraries with the SKM
- SKM pre-installation checklists
- SKM pre-installation survey
E-mail address of SO
Web interface port number for appliance 1
Fully qualified host name for appliance 1
For appliance 1, network port 1
IP address
Subnet mask
Default gateway
For appliance 1, network port 2 (optional)
IP address
Subnet mask (same as port 1 if blank)
Default gatew
ay (same as port 1 if blank)
For appliance 2
Admin password defined?
Web interface port number
Fully qualified hostname
For appliance 2, network port 1
IP address
Subnet mask
Default gateway
For appliance 2, network port 2 (optional)
IP address
Subnet mask (same as port 1 if blank)
Default gat
eway (same as port 1 if blank)
For appliance 3 (optional)
Admin password defined?
Web interface port number
Fully qualified hostname
For appliance 3, network port 1
IP address
Subnet mask
Default gateway
For appliance 3, port 2 (optional)
IP address
Subnet mask (same as port 1 if blank)
Default g
ateway (same as port 1 if blank)
Pre-installation survey and checklists, for connecting to ETLA libraries
9