Maintenance and Service Guide

3. Release the ZIF connector (3) to which the right-side credit card reader board cable is attached,

and then disconnect the right-side credit card reader board cable (4) from the left-side credit card

reader board.

4. Remove the left-side credit card reader board.

5. Detach the right-side credit card reader board cable (1) from the rear cover. (The right-side credit

card reader board cable is attached to the rear cover with double-sided adhesive.)

6. Remove the Phillips PM1.9×3.0 screw (2) that secures the right-side credit card reader board to

the rear cover.

Retail Jacket component replacement procedures