Maintenance and Service Guide

3. Remove the slot cover (4) by pressing it through the bottom cover.

4. Remove the slot cover.

Reverse this procedure to install the slot cover.

Docking connector cable

Description Spare part number

Docking connector cable (includes double-sided adhesive) 747631-001

Before removing the docking connector cable, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,

and then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the display assembly (see

Display assembly on page 30), and then remove the

following components:

a. NFC antenna (see

NFC antenna on page 38)

b. WWAN module (see

WWAN module on page 39)

c. Power button board (see

Power button board on page 45)

Tablet component replacement procedures