Maintenance and Service Guide

2. Detach the vibrator module (2) from the bottom cover. (The vibrator module is attached to the

bottom cover with double-sided adhesive.)

3. Remove the vibrator module and cable.

NOTE: The vibrator module cover is attached to the vibrator module with double-sided adhesive.

Reverse this procedure to install the vibrator module.

Battery

Description Spare part number

2-cell, 30-Wh, 4.0-Ah, Li-ion battery (includes battery cable and WWAN/GPS main transceiver

and antenna cable)

728558-005

Before removing the battery, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,

and then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the display assembly (see

Display assembly on page 30).

Tablet component replacement procedures