Maintenance and Service Guide

Vibrator module
Description Spare part number
Vibrator module (includes cable, double-sided adhesive, plastic cover) 747630-001
Before removing the vibrator module, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the display assembly (see
Display assembly on page 30).
5. Remove the NFC antenna (see
NFC antenna on page 38).
Remove the vibrator module:
1. Disconnect the vibrator module cable (1) from the system board.
50 Chapter 5 Removal and replacement procedures