Maintenance and Service Guide

Reverse this procedure to install the power button board.

Volume button board

Description Spare part number

Volume button board (includes bracket and cable) 759031-001

Before removing the volume button board, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,

and then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the display assembly (see

Display assembly on page 30).

5. Remove the NFC antenna (see

NFC antenna on page 38).

Remove the volume button board:

1. Disconnect the volume button board cable (1) from the power button board.

2. Release the volume button board cable from the retention clips (2) built into the battery.

3. Remove the two Phillips PM1.5×2.0 screws (3) that secure the volume button board to the

bottom cover.

Tablet component replacement procedures