Operation Manual
Using the digital pen (select products only)
To insert the battery in the pen:
1. Unscrew the pen to disassemble it.
2. Remove the old battery and recycle it properly.
3. Install the new battery.
4. Securely reassemble the pen.
5. Wait 2 seconds for the pen to calibrate automatically.
NOTE: Pressing the tip of the pen during the 2-second calibration cycle invalidates the process and
requires that you recalibrate the pen.
The digital pen is now ready to use with your tablet. Simply touch the tip of the pen lightly on the screen to
write text or select items on the screen.
To perform a right-click action, press the button on the side of the pen when selecting an item on the screen.
The digital pen uses inherent pressure sensitivity, so you can create a bolder stroke by pressing harder on the
screen with the digital pen. Pressure sensitivity may not be enabled or supported, depending on the
application or program.
To change pen settings, such as pen sensitivity, type control panel in the taskbar search box, select
Control Panel, select Hardware and Sound, select Pen and Touch, and then follow the on-screen
instructions.
NOTE: For regulatory and safety information, refer to the Regulatory, Safety, and Environmental Notices on
the HP tablet. To access HP Support Assistant, type support in the taskbar search box, tap the HP Support
Assistant app. tap My PC, select the Specifications tab, and then tap User guides.
Using the digital pen (select products only) 17