Service and Maintain

4. Lift the latch on one side of the drive cage and pull the hard disc drive out of the cage.

5. Remove the four mounting screws from the 3.5-inch hard disc drive. Be sure to keep the screws

together with the blue rubber grommets to use to install a replacement disc drive.

For instructions on installing a hard disc drive, see Installing a hard disc drive on page 52.

Removing a 2.5-inch hard disc drive

1. Prepare the computer for disassembly (see

Preparing to disassemble the computer on page 35).

2. Remove the access panel (see

Access panel on page 39).

Drives