Service and Maintain

13. Note the routing path for each antenna for replacement.
To install the antenna, reverse the removal procedures.
Display panel
Description Spare part number
Display panel 732495-001
Display panels require a backlight cable specific to the manufacturer. Make sure you use the backlight
cable packaged with the display panel.
The display panel is secured to the base pan with four Torx screws.
To remove the display panel:
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 35).
2. Remove the access panel (see
Access panel on page 39).
3. Remove the optical drive (see
Replacing the optical disc drive on page 56).
4. Remove the stand (see
Stand on page 41).
5. Remove the lower panel (see
Lower panel on page 44).
Display panel
105