Operation Manual

3. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of
the disc. Hold the disc by the edges and avoid touching the at surfaces.
NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it.
4. Close the disc tray and place the disc in a protective case.
Slot-load
1. Press the release button (1) next to the drive.
2. Remove the disc (2) by holding it by the edges and avoid touching the at surfaces.
3. Place the disc in a protective case.
Using optional external optical drives (select models only) 41