User Manual

2. Insert the battery into the battery bay, aligning the tabs on the battery (1) with the notches on the
computer, and then press the battery down until it is seated.
Slide the two battery release latches (2) to lock the battery into place.
Removing a battery
To remove the battery:
CAUTION: Removing a battery that is the sole power source for the computer can cause loss of
information. To prevent loss of information, save your work and shut down the computer through
Windows before removing the battery.
1. Remove the service door. See Removing or replacing the service door on page 56.
2. Slide the two battery release latches to the unlocked position (1). You will be able to see red
beneath the latches. .
46 Chapter 6 Power management ENWW