Specifications

3. Remove the audio/ExpressCard assembly (3) by sliding it up and to the right.
Reverse this procedure to install the audio/ExpressCard assembly.
Modem module cable
NOTE: The modem module spare part kits do not include a modem module cable. The modem module
cable is included in the Cable Kit, spare part number 487432-001. The modem module cable includes
an RJ-11 connector.
Before removing the modem module cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
Battery on page 43).
5. Remove the following:
a. Hard drive (see
Hard drive on page 49)
b. Keyboard (see
Keyboard on page 57)
c. Switch cover (see
Switch cover on page 66)
d. Display assembly (see
Display assembly on page 77)
e. Top cover (see
Top cover on page 82)
Remove the modem module cable:
1. Disconnect the modem module cable (1) from the system board.
90 Chapter 4 Removal and replacement procedures