Operation Manual
8 Specications
Input power
The power information in this section may be helpful if you plan to travel internationally with the lap dock.
The lap dock operates on DC power, which can be supplied by an AC or a DC power source. The AC power
source must be rated at 100–240 V, 50–60 Hz. Although the lap dock can be powered from a standalone DC
power source, it should be powered only with an AC adapter or a DC power source supplied and approved by
HP for use with this lap dock.
The lap dock can operate on DC power within the following specications. The voltage and current for your lap
dock is located on the regulatory label.
Input Power Rating
Operating voltage and current 15 V dc @ 3 A – 45 W USB-C
NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding
240 V rms.
Operating environment
Factor Metric U.S.
Temperature
Operating (writing to optical disc) 5°C to 35°C 41°F to 95°F
Nonoperating -20°C to 60°C -4°F to 140°F
Relative humidity (noncondensing)
Operating 10% to 90% 10% to 90%
Nonoperating 5% to 95% 5% to 95%
Maximum altitude (unpressurized)
Operating -15 m to 3,048 m -50 ft to 10,000 ft
Nonoperating -15 m to 12,192 m -50 ft to 40,000 ft
26 Chapter 8 Specications