HP SlateBook 10 x2 PC Maintenance and Service Guide

Remove the media card reader board:
1. Release the ZIF connector (1) to which the media card reader board cable is attached, and then
disconnect the media card reader board cable from the docking board.
2. Detach the media card reader board cable (2) from the keyboard/top cover. (The media card
reader board cable is attached to the keyboard/top cover with double-sided adhesive.)
3. Remove the two Phillips PM2.0×2.3 broad head screws (3) that secure the media card reader
board to the keyboard/top cover.
4.
Remove the media card reader board (4) and cable.
Reverse this procedure to install the media card reader board.
Hinge assembly
NOTE: The hinge assembly spare part kit includes two cables and two rubber feet.
Description Spare part number
In royal blue finish 730528-001
In smoke silver finish 728147-001
In snow white finish 730527-001
Removal and replacement procedures
39