HP LaserJet Enterprise M604, M605, M606 - User Guide

●
Energy Settings
●
Sleep Timer Settings
3. 4-line control panels only: Select Sleep/Auto O Timer, and then select Enabled. Press the OK button.
4. Select Sleep /Auto O After.
5. Use the keypad to enter the appropriate time period, and then touch the Save button, or press the OK
button.
NOTE: The sleep-mode default time is 1 minute.
6. Select one of the Wake/Auto On to These Events options:
●
All events: The product wakes when it receives any print job (through the USB port, network port, or
wireless connection), or when someone presses a button on the control panel, or opens any door or
tray.
●
Network port: The product wakes when it receives a print job sent through the network port, or when
someone presses a button on the control panel, or opens any door or tray. With this setting, the
product uses 1 watt or less of power while in the Sleep/Auto O state.
●
Power button only: The product wakes only when someone presses the power button. With this
setting, the product uses 1 watt or less of power while in the Sleep/Auto O state.
ENWW Economy settings 81