HP LaserJet Enterprise M604, M605, M606 - User Guide

Replace the staple cartridge
Introduction
If the stapler runs out of staples, jobs continue to print to the stapler/stacker, but they are not stapled.
To purchase staple cartridges, go to the HP Parts Store at www.hp.com/buy/parts.
Table 3-1 Staple cartridge information
Item Description Part number
1,000-staple cartridge Provides three staple cartridges Q3216A
Remove and replace the staple cartridge
1. On the right side of the stapler/stacker, turn the
stapler unit toward the front of the product until
the unit clicks into the open position. Grasp the
blue staple-cartridge handle and pull the cartridge
out of the stapler unit.
2. Insert the new staple cartridge into the stapler unit
and rotate the stapler unit toward the rear of the
product until the unit snaps into place.
46 Chapter 3 Supplies, accessories, and parts ENWW