HP LaserJet Enterprise M604, M605, M606 - User Guide

Load the optional custom media tray
Introduction
The following information describes conguring the product to use the optional custom media tray (part number
F2G75A) and loading paper into this tray. The custom media tray ts into the Tray 2 position only, and it holds
smaller size paper than the standard tray in the Tray 2 position. It supports these paper sizes:
●
Statement
●
5 x 7
●
5 x 8
●
A5
●
A6
●
B6 (JIS)
●
Double Japan Postcard Rotated
●
Double Postcard (JIS)
NOTE: The stapler does not support any of the paper sizes that the custom media tray supports. The
automatic duplexer supports A5 size when paper is loaded with the short-edge rst, but it does not support any
of the other sizes that the custom media tray supports.
Congure the product for the custom media tray
1. Press the Home button on the product control panel.
2. Open the following menus:
●
Administration
●
Manage Trays
●
Tray 2 Model
3. Select Custom Tray.
4. Press OK.
32 Chapter 2 Paper trays ENWW