HP LaserJet Enterprise M604, M605, M606 - User Guide

3. Adjust the paper-length guide by squeezing the
adjustment latch and sliding the guide to the size
of the paper being used.
2
4. Load paper into the tray. Check the paper to verify
the guides lightly touch the stack, but do not bend
it. For information about how to orient the paper,
see Tray 2 and the 500-sheet trays paper
orientation on page 29.
NOTE: To prevent jams, adjust the paper guides
to the correct size and do not overll the tray. Be
sure that the top of the stack is below the tray full
indicator.
2
5. Close the tray.
28 Chapter 2 Paper trays ENWW