HP LaserJet Enterprise M604, M605, M606 - Stacker Installation Guide
2
9
7 8
OS X
For a USB connection, perform the following steps:
1. From the Apple menu (
), choose System Preferences.
2. Choose Print & Scan (or Printers & Scanners).
3. Choose the printer, click the Options & SuppliesOptions
4.
Windows® 8.0 and 8.1
When attaching the accessory after installing the printer software, perform the following steps:
1.
2. Select Control Panel. Under Hardware and Sound, select View devices and printers.
3. Printer Properties.
4. Click the Device Settings
5. Update the installed options. The steps vary according to connection type and print driver:
For a network connection with the HP Universal Print Driver (UPD): In the Installable Options section under , select
Update Now.
For a network connection with the HP PCL 6 print driver: Select Update Now.
Update Now is not present or when using a USB connection,
Accessory Output Bin and choosing the accessory.
Windows® 7
perform the following steps:
1. Make sure the printer is turned on and connected to the computer or network.
2. Open the Windows Start menu, and then click Devices and Printers.
3. Printer Properties.
4. Click the Device Settings
5. Update the installed options. The steps vary according to connection type and print driver:
For a network or USB connection with the HP Universal Print Driver (UPD): In the Installable Options section under Automatic
, select Update Now.
For a network or USB connection with the HP PCL 6 print driver: Select Update Now.
Accessory Output Bin and choosing the accessory.
Windows® XP and Windows Vista®
connection, perform the following steps:
1. Make sure the printer is turned on and connected to the computer or network.
2. Open the Windows Start menu, and then click Devices and Printers (or Printers and Faxes for XP).
3. Printer Properties (or Properties for XP).
4. Click the Device Settings
5. Click the Installable Options section.
6. Update the installed options. The steps vary according to connection type:
, select Update Now.
For a USB connection: Manually install the accessory in Installable OptionsAccessory Output Bin and choosing the accessory.
NOTE: Windows XP only: For a USB connection, do not select Update Now
system and connection. If Update Now is selected, a delay of several minutes occurs while the driver tries to connect and eventually times out..
EN