HP LaserJet Enterprise M604, M605, M606 - Setup guide

Set up HP ePrint via email

Use HP ePrint via email to print documents by sending them as an email attachment to the product’s email address from any email enabled

device, even from devices that are not on the same network.

To use HP ePrint via email, the product must meet these requirements:

• The product must be connected to a wired or wireless network and have Internet access.

• HP Web Services must be enabled on the product, and the product must be registered with HP Connected

Enable HP Web Services

1. Open the HP Embedded Web Server (EWS):

a. 4-line control panels: View the control-panel display to see the IP address.

Touchscreen control panels: From the Home screen on the product control panel, touch the Network

button to display the IP address

or host name.

b. Open a Web browser, and in the address line, type the IP address or host name exactly as it displays on the product control panel.

Pressthe Enter key on the computer keyboard. The EWS opens.

NOTE: If the Web browser displays a There is a problem with this website’s security certicate message when attempting to open

the EWS, click Continue to this website (not recommended). Choosing Continue to this website (not recommended) will not harm the

computer while navigating within the EWS for the HP product.

2. Click the HP Web Services tab.

3. Select the option to enable Web Services.

NOTE: Enabling Web Services might take several minutes.

4. Go to www.hpconnected.com or www.hp.com/go/eprintcenter to create an HP ePrint account and complete the setup process.

ZHCN

设置通过电子邮件的 HP ePrint

使用通过电子邮件的 HP ePrint 打印文档，具体方法是从任何支持电子邮件的设备（甚至可从不在同一网络上

的设备）将这些文档作为电子邮件附件发送到产品的电子邮件地址。

要使用通过电子邮件的

HP ePrint，本产品必须满足以下要求：

• 产品必须连接到有线或无线网络并可访问 Internet。

• 产品上必须启用 HP Web 服务，并且产品必须注册到 HP Connected。

启用

HP Web 服务

1. 打开 HP 内嵌式 Web 服务器 (EWS)：

a. 4 行控制面板：查看控制面板显示屏以查看该 IP 地址。

触摸屏控制面板：在产品控制面板上的主屏幕中，轻触网络

按钮以显示 IP 地址或主机名。

b. 打开 Web 浏览器，然后在地址行中键入在产品控制面板上显示的准确 IP 地址或主机名。按计算机键盘上

的

Enter 键。随后将打开 EWS。

注：如果在尝试打开

EWS 时 Web 浏览器显示此网站的安全证书有问题消息，请单击继续浏览此网站

(不推荐)。在 HP 产品的 EWS 中导航时，选择继续浏览此网站(不推荐) 不会对计算机造成伤害。

2 单击 HP Web 服务选项卡。

3. 选择启用 Web 服务的选项。

注：启用

Web 服务可能耗时几分钟。

4. 访问 www.hpconnected.com 或 www.hp.com/go/eprintcenter 以创建 HP ePrint 帐户并完成设置过程。