HP LaserJet Enterprise M604, M605, M606 - Installation Guide

Set up HP ePrint via email

Use HP ePrint via email to print documents by sending them as an email attachment to the product’s email address from any email enabled

device, even from devices that are not on the same network.

To use HP ePrint via email, the product must meet these requirements:

• The product must be connected to a wired or wireless network and have Internet access.

• HP Web Services must be enabled on the product, and the product must be registered with HP Connected

Enable HP Web Services

1. Open the HP Embedded Web Server (EWS):

a. 4-line control panels: View the control-panel display to see the IP address.

Touchscreen control panels: From the Home screen on the product control panel, touch the Network

button to display the IP address

or host name.

b. Open a Web browser, and in the address line, type the IP address or host name exactly as it displays on the product control panel. Press

the Enter key on the computer keyboard. The EWS opens.

NOTE: If the Web browser displays a There is a problem with this website’s security certicate message when attempting to open

the EWS, click Continue to this website (not recommended). Choosing Continue to this website (not recommended) will not harm the

computer while navigating within the EWS for the HP product.

2. Click the HP Web Services tab.

3. Select the option to enable Web Services.

NOTE: Enabling Web Services might take several minutes.

4. Go to www.hpconnected.com or www.hp.com/go/eprintcenter to create an HP ePrint account and complete the setup process.