HP LaserJet Enterprise, HP PageWide Enterprise, HP LaserJet Managed, HP PageWide Managed Printers - HP RAM Disk (white paper)

RAM Disk Error 33.03.07
The RAM Disk error 33.03.07 can be displayed on the BIOS menu in three different scenarios:
• If the DIMM accessory is removed from the printer prior to disablement via the Embedded Web Server.
• If the DIMM accessory is left off the formatter during a printer repair.
• If the DIMM accessory fails.
In any of these scenarios, the printer boot process will stop at the pre-boot menu and post the 33.03.07 No
DIMM Installed message (Figure 6). This message is also logged in the Event Log (Figure 7).
Figure 6: Error message: 33.03.07 No DIMM Installed
Figure 7: Event Log Page
Resolve the error
To resolve the error, use one of the following solutions:
• Solution one: Reinstall the accessory DIMM onto the formatter as per the DIMM installation instructions.
Or
• Solution two: Disable the RAM Disk function from the Preboot menu, using the following instructions:
a) At the Preboot menu error code, press the Back arrow.
b) Press the down arrow to the Administrator menu. Press OK.