HP LaserJet Enterprise, HP PageWide Enterprise, HP LaserJet Managed, HP PageWide Managed Printers - HP RAM Disk (white paper)

Enable RAM Disk
Follow these steps to enable RAM Disk:
1. Power the printer off.
2. Install the DIMM in the printer according to the DIMM installation instructions.
3. Power the printer on and wait for the printer to come to the Ready state.
4. Open a web browser.
5. In the URL field, type the IP address of the printer and then press Enter.
NOTE: If the web browser displays a message indicating that accessing the website might not be safe,
select the option to continue to the website.
Accessing this website will not harm the computer. This message is received if the printer enforces HTTPS.
6. Select the Information tab, click Configuration Page to view the printer information (Figure 1). Verify the
DIMM shows in the installed personalities and options.
Figure 1: EWS - Configuration Page
7. Select the Security tab, and then select the Protect Stored Data in the left navigation menu.