Administrator's Guide

7. Remove the two screws from the bracket of the failed PCIe module (1), remove the bracket
(2), and then remove the PCIe card from the failed module (3).
Replacing the PCIe module
To replace the PCIe module:
1. Install the PCIe card in the replacement module (1), replace the bracket (2), and then reinsert
the two screws into the bracket of the replacement module (3).
2. Insert the replacement PCIe module into the system (1), and lock the release lever (2).
NOTE: The PCIe module should be inserted with the lever in the open position.
3. Plug in all cables to the PCIe module in their original locations.
4. Power on the server blade by pressing the power button On.
96 Removing and replacing hardware components