Administrator's Guide

Figure 2 HP E5000 Messaging System rear view

1. System fan

2. HP StorageWorks 2-port Ethernet I/O module (2) (These modules connect to the NIC located on the server blade

motherboard)

3. Drive fan

4. SAS I/O module (2)

5. Power button

6. Power supply (2)

7. HP StorageWorks 2-port Ethernet I/O module (These modules (2) connect to the NIC located on top of the Mezzanine

card on the server blade. Standard on the E5500 and E5700 and can be added as option for the E5300

8. Management port (for iLO and Enclosure Manager Unit)

Messaging system software components

The E5000 Messaging System includes factory integration of the hardware and pre-loading of the

E5000 software image, including Windows Server 2008 R2, which has been pre-installed and

activated. The E5000 system configuration also includes the HP E5000 Configuration Wizard and

E5000 Messaging System Exchange Deployment Tool, which are used to deploy the Exchange

servers and storage in their optimal configurations.

The E5000 Configuration Wizard assists during the initial out of box setup and configuration of

the messaging system. This tool helps to configure each of the customer specific settings needed

to prepare the server.

Exchange 2010 is then installed and configured using the E5000 Messaging System Exchange

Deployment Tool, which has been developed to automate many of the deployment tasks.

To provide ongoing monitoring and facilitate management, the messaging system includes the

E5000 System Manager, which provides a snapshot view of the health and status of the messaging

system as well as tools to manage firmware updates.

For a more complete description of E5000 Messaging System features, see

http://www.hp.com/go/E5000.

8 HP E5000 Messaging Systems for Microsoft Exchange