Administrator's Guide

Table 1 Examples of possible error messages (continued)
ResolutionIssueMessage appears
Connect the cable in the back of the
enclosure. If the cable is not on, you
must use a MAPI network. For the
E5300, which does not offer replication
networking, you may use a public
network for replication and need to
configure the IP address manually.
Replication and MAPI network not
connected
Lost replication connection
Note: If you lose a network connection
and you’ve set up notification alerts,
you are automatically alerted. If you do
not have notification alerts, open the
System Manager, System Summary tab.
Reboot the server blade that has failed.
Open the System Manager, System
Summary tab to identify the server
blade that does not say “storage.”
Storage array lock upVolumes have failed; Degraded
controller
Microsoft Exchange marks the volumes
as failed, and the mail serving
processor fails over to the other server
blade.
Important: You must manually
rebalance the database server after
rebooting. Microsoft also offers a
redistribution script to assist you.
Periodically check the System Manager
Firmware tab to ensure you are running
the most current firmware.
Firmware not currentUnsupported firmware
Important: Be sure to check the
firmware status after you replace any
component on the messaging system.
Configuring Event Notifier for proactive email (SMTP) event notification
Configure Event Notifier to enable proevent notification to send email notification of system events.
To start the Event Notifier Configuration wizard and provide the required information for your
environment (SMTP, notification recipients, and SNMP):
Configuring Event Notifier for proactive email (SMTP) event notification 39