Administrator's Guide

6. Set the network configuration. Review each network port configurations and either accept the
default values or press Edit to change them. Click Next when finished.
IMPORTANT: By default, the Replication network is set to a static network 10.0.0.0/30 with
IP 10.0.0.1 on the first node and 10.0.0.2 on the second. If these addresses conflict with
addresses on your network, please reconfigure them to some other unused static network. The
following figure shows an E5300 configuration, which has 2 networks: Client/Mapi and
Replication. E5500/5700 configurations have 4 networks: Client/Mapi, Replication,
Management, and Alternate (see Figure 6 (page 12)).
Configuring server software 27