Administrator's Guide

logged into the iLO, you can change the Administrator password and select the
Administration tab under the User Administration section.
3. Under the Administration tab, configure the network as required for your environment.
Select the section labeled Network. You can either enable DHCP or edit the IP address
details and enter site-specific network settings. The following example shows a DHCP
configuration.
4. After completing your changes, click Apply to save your settings.
5. Repeat the process on the other server blade. Launch Internet Explorer and entering the
following URL: https://10.0.0.12.
3. Configure the EMU.
Configure the EMU and iLO management processors 19