Administrator's Guide

Restrictions
Only deletes the syslog stored inside the EM itself—not the remote syslog if remote logging is
enabled.
SHOW SYSLOG SERVER
Syntax
SHOW SYSLOG SERVER <bay#>
Description
Displays the syslog for the specified server. If the session is not script mode, the EM paged the
display of the output to throttle output and give the user time to view the data. iLO syslog data is
formatted in XML.
Restrictions
• <bay#> must be 1 or 2.
• This command can only function if enclosure power is on. Because the EM hardware cannot
determine if a blade is physically present unless enclosure power is on, the EM reports the
warning “Could not determine the ip address of the management processor for blade’ if this
command is issued when power is off.
SHOW SYSLOG EM
Syntax
SHOW SYSLOG EM
Description
Displays the local syslog for the Enclosure Manager.
Restrictions
None
SHOW SYSLOG SETTINGS
Syntax
SHOW SYSLOG SETTINGS
Description
Displays the remote syslog settings (enabled/disabled status, IP address, Port#) for the Enclosure
Manager.
Restrictions
None
TEST SYSLOG
Syntax
TEST SYSLOG
Description
Tests the remote system log settings by logging a test message to the remote syslog. The test message
also appears in the local EM system log.
CLI reference 181