Administrator's Guide

Restrictions
None
SET RACK NAME
Syntax
SET RACK NAME "<rack name>"
Description
Sets the user-defined string reported with SHOW RACK NAME command. The system responds with
confirmation of the change. The default (unset by user) rack name is ‘UnnamedRack’.
Restrictions
<rack name> must be 1 to 32 characters long and includes all alphanumeric, underscore (_), and
dash (–) characters.
Example
EM-78E7D1C12074> set rack name RACK_DATABASE
Changed rack name to "RACK_DATABASE".
UPDATE IMAGE
Syntax
UPDATE IMAGE { [ FORCE ] <URL> }
Description
Downloads a new EM firmware image from the network and uses it to update the Enclosure
Manager’s firmware. Supported protocols are HTTP, FTP, and TFTP. The EM validates the image
before performing the update. Unless the session is in script mode, the EM requests confirmation
before performing the update.
After update, the EM is restarted unless the FORCE operation was used in which case a manual
invocation of RESTART EM is necessary to reboot the new firmware.
Restrictions
• <URL> should be formatted as: protocol://host/path/filename.
• Host is a fully qualified domain name or an IPv4 address.
• path/filename is the pathname of the file to download.
• Use FORCE to allow downgrading firmware even if settings/passwords may be lost.
Forensic
The following set of forensically useful functions is supported by EM CLI.
CLEAR SYSLOG
Syntax
CLEAR SYSLOG [ EM | ENCLOSURE ]
Description
Completely erases the local syslog of the Enclosure Manager. The EM prompts the user for
confirmation because once deleted, this information cannot be recovered.
180 EMU reference