Administrator's Guide

Port 2: 50:01:43:80:06:fe:5a:e1
Port 3: 50:01:43:80:06:fe:5a:e2
Port 4: 50:01:43:80:06:fe:5a:e3
Management Processor Information:
Type: iLO2
Name: ILOMXQ93305T8
Firmware Version: 1.78 Jun 10 2009
IP Address: 16.83.142.21
MAC Address: 00:26:55:22:E9:AA
Power Management Controller Version: Not Available
SHOW SERVER LIST
Syntax
SHOW SERVER LIST
Description
Displays a brief iLO and status description of all server blades. For a longer description, use SHOW
SERVER INFO.
Restrictions
This command functions only if the enclosure power is already on. Because the EM hardware
cannot determine if a blade is physically present unless enclosure power is on, the EM reports the
warning ‘enclosure power is off’ if this command is issued when power is off.
Example
EM-78E7DC12074> show server list
Bay iLO Name iLO IP Address Status Power UID
--- ----------------------------- --------------- -------- ------- ---
1 ILOMXQ9350526 16.83.141.254 OK On Off
2 ILOMXQ93305T8 16.83.142.21 OK On Off
Totals: 2 server blades installed, 2 powered on.
SHOW SERVER STATUS
Syntax
Description
Displays current status of the server blade in the specified bay or 2 bays.
Restrictions
This command functions only if the enclosure power is already on. Because the EM hardware
cannot determine if a blade is physically present unless enclosure power is on, the EM reports the
warning ‘enclosure power is off’ if this command is issued when power is off.
Example
EM-78E7DC12074> show server status all
Blade #1 Status:
Power: On
Current Wattage used: 191
Health: OK
Unit Identification LED: Off
Blade #2 Status:
Power: On
Current Wattage used: 173
Health: OK
Unit Identification LED: Off
176 EMU reference