Administrator's Guide

Example
EM-78E7D1C12074> show server temp all
Device Bay #1 Temperature Information
Locale Status Temp Caution Critical
---------------------------------- ------ -------- ------- --------
Ambient Zone OK 23C/ 73F 42C 46C
CPU 1 OK 40C/104F 82C 83C
CPU 2 OK N/A
Memory Zone OK 32C/ 89F 87C 92C
Memory Zone OK 30C/ 86F 85C 90C
Memory Zone OK 37C/ 98F 85C 90C
System Zone OK 37C/ 98F 85C 90C
System Zone OK 39C/102F 78C 83C
System Zone OK 52C/125F 110C 115C
Drive Backplane OK 21C/ 69F 60C 65C
Device Bay #2 Temperature Information
Locale Status Temp Caution Critical
--------------------------------- ------ -------- ------- --------
Ambient Zone OK 23C/ 73F 42C 46C
CPU 1 OK 40C/104F 82C 83C
CPU 2 OK N/A
Memory Zone OK 31C/ 87F 87C 92C
Memory Zone OK 29C/ 84F 85C 90C
Memory Zone OK 36C/ 96F 85C 90C
System Zone OK 36C/ 96F 85C 90C
System Zone OK 38C/100F 78C 83C
System Zone OK 49C/120F 110C 15C
Drive Backplane OK 15C/ 59F 60C 65C
Internet control
The EM bridges two networks: an external network and an internal network. The iLO of both servers
is connected to the internal network, and EM uses this network to interact with iLO using IPMI
messages to control the servers. EM also bridges the two iLO management processors to the external
management LAN for other software and to enable users to interact with iLO directly. Only the
two servers and the two SAS IO modules are connected. CSP IO modules have no web-based user
interface, so EBIPA is used exclusively for the 2 iLO management processors in the blades.
The following commands define the EM 1.0 CLI functions for Internet control in CSP.
ADD EBIPA
Syntax
ADD EBIPA { SERVER } DNS <ip address>
Description
Adds an EBIPA DNS server IP address to the list of DNS servers for server bays.
Restrictions
• A maximum of 3 DNS servers can be added for EBIPA.
• <ip address> must be in the form ###.###.###, where each ### ranges from 0 to 255.
REMOVE EPIBA
Syntax
REMOVE EBIPA { SERVER } DNS <ip address>
Description
Removes an EBIPA DNS server IP address from the list of DNS servers for server bays.
CLI reference 169