Administrator's Guide

Unpack and rack the messaging system hardware
WARNING! The messaging system enclosure is heavy. Always use at least two people to move
the storage system into the rack.
1. If you ordered the messaging system without the rack, install the rail kit and enclosure by
following the HP Rail Kit Installation Instructions that are included with the rail kit.
If your messaging system is delivered in a rack, proceed to Step 2.
IMPORTANT: Ensure that cabling in the back of the rack system does not interfere with
system operation or maintenance. Bind cables loosely with cable ties and route the excess
out of the way, along the side of the rack, to keep system components and indicators visible
and accessible.
1. Messaging system enclosure
2–5. Expansion nodes (optional)
6, 7. Cable connection, with no bend radius smaller than 5 cm
Unpack and rack the messaging system hardware 15