Administrator's Guide

7. Open the ejector latches on each side of the cache module slot.
Typically, opening the ejector latches ejects the cache module automatically. If the module
does not eject automatically after you open the ejector latches, remove the cache module by
grasping only the edges.
8. Remove the cache module (1) from the controller card (3) and the capacitor pack (2) from the
server blade.
CAUTION: Wear gloves or use care when removing the capacitor to avoid physical injury.
NOTE: Be sure to first remove the capacitor pack bracket.
9. After you remove the cache module, disconnect the capacitor cable from the module.
Replacing the capacitor pack
To replace the capacitor pack:
Removing and replacing the controller and controller server blade components 145