Administrator's Guide

8. Remove the capacitor pack (2).
The P1210m cache module is shown as (1), and the controller card is (3).
CAUTION: Wear gloves or use care when removing the capacitor to avoid physical injury.
NOTE: Be sure to first remove the capacitor pack bracket.
9. Disconnect the capacitor pack cable from the connector on the top of the cache module.
Replacing the cache module
To replace the cache module:
1. Connect the capacitor pack cable to the replacement cache module.
2. Install the replacement cache module in the cache module slot (1).
3. Close the ejector latches on the cache module slot (2).
Removing and replacing the controller and controller server blade components 143